Audio, Music

Basic audio restoration using Ableton Live and MATLAB

Walt, the drummer from The Havering, just sent me an mp3 file of a Havering recording from a Stanford College Radio show in 1989. The mp3 file was created from the original recording on a thirty year old cassette tape, so the quality is not fantastic. The aim here is to clean it up and publish it on The Havering song archive.

My Digital Audio Workstation (DAW) of choice when working with audio clips and samples is Ableton Live which is the main environment I’ll use for this mini-project.

This project also presents a good opportunity to test drive the MATLAB Audio Toolbox.

Restoring the audio involves multiple stages, much of which is trial-and-error. Foremost is noise removal.

Noise Removal

Here is the start of the first song (“Trust”). The background noise is rather apparent during the non-music lead-in, continuing into the music:

Snippet of the raw (noisy) recording

Helpfully, because this is a recording of a live radio show, there are lulls in the music where only the noise is present. For example, here is the snippet of noise from the non-music lead-in (amplified for emphasis):

Just the noise lead-in from the previous snippet (amplified)

The first step in removing or suppressing the noise is to try and gain an understanding of it. Since we have the noise-alone snippet, we can analyse it in isolation (this isn’t always the case: often we only have the music-plus-noise available. But we are lucky here). Loading the noise file into MATLAB (via the audioread function) and utilising the pspectrum function to generate the noise spectrum yields the plot displayed in Figure 1:

Figure 1: Noise spectrum revealing the broadband nature of the background noise in the recording.

This is a “textbook” example of broadband noise whereby the power spectrum is effectively uniform over the frequency range of interest (i.e., over the audio range from 20 Hz to 20 kHz, approximately). It does drop off dramatically around 17 kHz or so, but even so, the noise level is effectively constant (and high) over the audio/musical range of interest, and so will be quite tricky to deal with. Listening to the noise, it appears to be classic “tape hiss”, prevalent in analogue recordings such as the cassette tape used in this recording.

It is helpful to zoom-in on the low-frequency portion of the chart and view on a log-scale, as displayed in Figure 2.

Figure 2: Noise spectrum, zoomed-in on the low-frequency regime, revealing the 60 Hz “power hum” and its harmonics

There is a series of distinct peaks. Using the MATLAB findpeaks function reveals these to be at the following frequencies (averaged across both channels): 60 Hz, 120 Hz, 180 Hz, 240 Hz, 300 Hz, 430 Hz, and 680 Hz. The majority of these (60, 120, 180, 240, and 300 Hz) are classic “power hum” (fundamental mode plus four harmonics) from the AC power supply (the recording was made in California, US, where the power-grid AC fundamental frequency is 60 Hz — rather than 50 Hz in the UK).

Suppressing the “power hum”

Since the frequencies are well-defined for the low-frequency “power hum” components of the noise, this suggests utilising a bank of notch filters tuned to each mode of the noise (i.e., to “notch out” each noise component). Ableton Live has a built-in 8-band equalizer which can be used for this purpose. See the screenshot in Figure 3 below where the equalizer has been configured as required.

Figure 3: Ableton Live equalizer component configured with multiple notch filters tuned to suppress the “power hum” harmonics from Figure 2.

Below are the “before” and “after” audio clips. The notch filtering is effective at removing the “power hum”. Note: with these compressed mp3 snippets in this blog article, the low frequencies are suppressed by the mp3 encoding algorithm, so you may have to turn the volume up to hear the difference. Even then, it may be difficult to perceive the differences, though they are readily apparent in the uncompressed WAV files in Ableton and MATLAB.

“Before”: snippet of the raw (noisy) recording (from earlier)
“After”: snippet after processing to remove the “power hum”

Suppressing the “tape hiss”

The simplest approach to suppress the remaining tape hiss (now that the hum has been successfully removed) is to implement digital filtering to target the frequencies where the noise is most apparent to human hearing. In future I may experiment with more sophisticated techniques (e.g., STFT-thresholding, wavelet-transform-thresholding, Deep Learning, adaptive filtering, etc).

But for now, my approach is to design a digital filter with the aim of suppressing the noise (as perceived by a human listener) as far as possible without adversely affecting the music to a significant extent. There will inevitably be a trade-off between these competing goals.

I could continue with Ableton’s built-in filters to experiment with filter design, but for demonstration purposes I’ll switch over to MATLAB which has an extensive library of digital filter design algorithms (via the Signal processing Toolbox and the DSP System Toolbox) which can be brought to bear. Additionally, the Audio Toolbox has real-time audio streaming capabilities which enable the algorithm-under-test to be inserted in a real-time stream to/from audio files or devices or both.

After some trial-and-error , I settled on a high-frequency band-stop filter. Moreover, I selected an algorithm which happens to be provided as one of the out-of-the-box plugin examples (namely, the “Shelving Equalizer”) bundled with the MATLAB Audio Toolbox in order to demonstrate those capabilities.

Figure 4 contains a screenshot of the Shelving Equalizer loaded into a MATLAB audioTestBench which I’ve configured to stream data from a source audio file, through the filters, and out to the audio interface (in this case, a Focusrite Scarlett 2i4 soundcard with ASIO drivers). I manually adjusted the filter parameters by trial-end-error on-the-fly whilst listening to the processed audio in real-time. Note that the low-frequency filter is disabled (by setting its gain to 0 dB).

Figure 4: The audioTestBench utility from the MATLAB Audio Toolbox configured with the Shelving Equalizer with its parameters tuned to suppress the high frequency “tape hiss” (the low-frequency filter is disabled).

Below are the “before” and “after” audio clips (in this case, “before” is not the original raw file, but rather the file with the hum removed from the previous step in the process). As can be heard, the filtering is effective at removing the high-frequency “tape hiss” (again, with these mp3 snippets, you may have to turn the volume up to hear the difference). There is nevertheless some noise remaining in the mid-frequency range which I was not able to filter out without adversely affecting the music.

“Before”: snippet with “power hum” removed (from earlier)
“After”: snippet after further processing to remove the high-frequency “tape hiss”

One-click plugin

A very useful feature of the MATLAB Audio Toolbox is the ability to create a VST plugin from an algorithm prototyped in MATLAB, by clicking a single button. For example, I converted the Shelving Equalizer into a VST plugin by clicking the “generate VST Plugin” button located on the audioTestBench graphical-user-interface. By copying the resulting dll into Ableton’s plugin folder, the Shelving Equalizer becomes available from within Ableton Live, as illustrated in the screenshot in Figure 5 below. This allowed me to process the “tape hiss” via the MATLAB filter design, without having to bring the audio tracks out of Ableton. A considerable convenience.

Figure 5: Shelving Filter designed in MATLAB (see Figure 4), then converted to a VST plugin (via one mouse-click in the MATLAB audioTestBench), and imported to Ableton Live.

Noise Gate

Being a recording of a radio show, there are many quiet intervals between songs (e.g., when the band is introducing the next song, or the DJ is chatting, etc). It is during these lulls that the (remaining) noise is most apparent — and distracting. A simple technique to minimise this distraction is to use a Noise Gate to cut-out the audio when the volume falls below a given threshold. Then, when the music volume increases to performance levels, the music effectively masks the noise. This is a handy consequence of psychoacoustics: even though the noise is still there, we don’t perceive it to be at the same distracting level as we do during the lulls in the music.

Rather than simply deploying a noise gate, we can utilise a clever trick as described in this article. The trick is summarised as follows: (i) make a duplicate of the original noisy track, and keep the original aside for the moment; (ii) reverse the phase of each channel in the duplicate (i.e., multiply the amplitude of every sample by -1). Now, when played together, (i)+(ii) results in complete cancellation and total silence. That’s okay; (iii) pass the phase-reversed channel from (ii) through an inverted noise gate with its upper-and-lower thresholds configured such that only the noise passes through when the music volume is low, and nothing passes through when the music volume increases; (iv) play the original noisy track (i) together with the inverse-gated phase-reversed track (iii). The end result is complete silence during the lulls in the music. Away from the lulls, when the music is playing, the noise is still present, but the distracting noise at low music volumes is completely eliminated, giving the overall impression that the noise has been removed throughout (even though it actually hasn’t). This approach is a simplistic implementation of the technique of active noise cancellation (insofar as it utilises destructive interference of the noise waveform, albeit on the noise-only segments of the track, though without a separate noise measurement and adaptive filtering continually correcting the entire track).

Figure 6 contains a screenshot of Ableton’s built-in phase-reverser and inverted noise gate where the respective parameters have been specifically tuned (by trial-and-error) to implement (iii) on the noisy music recording in question.

Figure 6: Ableton Live’s phase reverser and noise gate (with “flip” enabled to invert the gate’s behaviour), with the thresholds tuned to allow only the noise to pass through the gate. When the music level rises, nothing passes through. The phase-reversed gated signal is added to the non-gated original phase signal such that the noise is totally cancelled at low levels e.g., in the lulls between songs.

Additional tweaks to the mix

Before applying the noise removal process, I reduced the overall dynamic range of the entire track by passing it through a compressor to suppress the peaks. Figure 7 contains a screenshot of the built-in Ableton compressor with appropriate settings for The Havering track (adjusted by trial-and-error).

Figure 7: Ableton Live’s built-in compressor applied to reduce the dynamic range of the original file before application of the de-noising algorithms.

I then applied the aforementioned de-noising processes, after which the resulting track seemed a little “lacking in body” compared with the original. To bring it back to life, I deployed a penultimate stage of filtering (equalisation): specifically, utilising Ableton’s built-in equaliser with its “Dance Master” configuration preset, inserted before the MATLAB-based Shelving Equalizer, as shown in the screenshot below in Figure 8. I also adjusted the overall gain of the final mix to maximise the available volume.

Figure 8 Equalization applied via Ableton Live’s built-in EQ to “revive the body” of the de-noised audio before application of the MATLAB-based Shelving Equalizer.

The final result

Original mp3 noisy recording of the entire radio show (approximately 24 minutes runtime)
Processed mp3 recording of the entire radio show after all stages of restoration have been applied (approximately 21 minutes runtime since silent lulls between songs have been removed)

In my opinion, comparing the noisy track with the cleaned-up track, the restoration has been a success. But it is subjective, so judge for yourself.

Here is the cleaned-up recording on Bandcamp where you can retrieve it in uncompressed FLAC format (better quality than mp3).


Basic digital filtering techniques have been shown to be somewhat effective for removing noise from an mp3 file of a live music recording transcribed from an old cassette tape, with minimal perceptible distortion of the underlying music signal.

The use of a digital audio workstation (e.g., Ableton Live) plus MATLAB is found to be a powerful combination in terms of extensive algorithmic capabilities and ease-of-workflow.

The ability to effortlessly create a VST Plugin from within the MATLAB Audio Toolbox is remarkable and very useful.

All of the mp3 audio snippets presented in this post were created using the MATLAB audiowrite function which supports such export. Another considerable convenience. By contrast, Ableton Live (at least Version 9 which I’m using) does not support mp3 export (!)

It would be interesting to compare the simple approach presented here with more advanced noise-processing techniques (as alluded to earlier), and with commercially-available 3rd party de-noising plugins (such as the much-acclaimed Rx 7).


After the concert, the organisers (Amnesty International) sent us a letter thanking us. Here is the letter. It was nice to receive it. The closing sentence makes mention of the very cassette tape used in this restoration project.

All audio content presented in this post is copyright The Havering 1989–2020, all rights reserved.